Descargar Imprimir esta página

Weber SUMMIT S-470 Guia Del Propietario página 29

Barbacoa de gas licuado de propano licuado
Ocultar thumbs Ver también para SUMMIT S-470:

Publicidad

Idiomas disponibles

Idiomas disponibles

WEBER ®SPIDER/INSECT
SCREENS
Your Weber _ gas barbecue,
as well as any outdoor gas appliance,
is a target for
spiders and other insects. They can nest in the venturi section (1) of the burner
tubes. This blocks the normal gas flow, and can cause the gas to flow back out of the
combustion
air opening. This could result in a fire in and around the combustion
air
openings, under the control panel, causing
serious damage to your barbecue.
The burner tube combustion
air opening is fitted with a stainless steel screen (2) to
prevent spiders and other insects access to the burner tubes through the combustion
air openings.
We recommend
that you inspect the Spider/mnsect screens
at meast once a year.
(See Section "Annual
Maintenance".)
Also
inspect and clean the the Spider/Insect
screens
if any of the following
symptoms
should
ever occur:
1)
The smell of gas in conjunction
with the burner flames appearing
yellow and lazy.
2)
Barbecue
does not reach temperature.
3)
Barbecue
heats unevenly.
4)
One or more of the burners do not ignite.
DANGER
FaiJure to correct the above mentioned
symptoms
may result
in a fire, which can cause serious bodily injury or death, and
cause damage to property.
MAIN BURNER CLEANING
PROCEDURE
TURN OFF THE GAS SUPPLY.
Remove the manifold (See "Replacing Main Burners").
Look inside each burner with a flashlight.
Clean the inside of the burners with a wire (a straightened-out
coat hanger will work).
Check and clean the air shutter opening at the ends of the burners. Check and clean
the valve orifices at the base of the valves. Use a Steel bristle brush to clean outside of
burners. This is to make sure all the burner ports are fully open.
z_ CAUTION:
Do not enlarge the burner ports when cleaning.

Publicidad

loading

Este manual también es adecuado para:

89190