Corghi A 2024 Manual De Uso página 20

INTRODUCTION
The purpose of this manual is to furnish the owner
and operator of this Corghi machine with a set
of practical and safe instructions for the use and
maintenance of the MTS 20", MTS 24" and A 2024
tyre changers.
Follow all the instructions carefully and your
tyre changer will assist you in your work and
give lasting and effi cient service in keeping with
CORGHI traditions.
The following paragraphs defi ne the levels of
danger regarding the machine associated with
the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of
serius injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before pow-
ering up the machine. Conserve this manual
and all illustrative material supplied with the
machine in a folder near the tyre changer where
it is readily accessible for consultation by the
machine operator.
The technical documentation supplied is con-
sidered an integral part of the machine; in the
event of sale all relative documentation must
remain with the jack.
The manual is only to be considered valid for
the machine of the model and with the serial
number indicated on the nameplate carried by
the machine.
WARNING
Adhere to the contents of this manual: Corghi
declines all liability in the case of actions not
specifi cally described and authorised in this
manual.
NOTE
Some of the illustrations in this manual have
been taken from photographs of prototypes; the
standard production model may differ slightly in
certain respects.
These instructions are for the attention of persons
with basic mechanical skills. We have therefore
condensed the descriptions of each operation by
omitting detailed instructions regarding, for exam-
ple, how to loosen or tighten the fi xing devices on
20
the machine. Do not attempt to perform operations
unless properly qualifi ed and with suitable experi-
ence. In case of need, please contact our nearest
authorised Service Centre for assistance.
TRANSPORT, STORAGE
AND HANDLING
Conditions for transporting the
machine
The tyre changer must be transported in its
original packing and maintained in the position
shown on the outer packing.
A 2024
- Machine packing dimensions:
• width .................................................. mm 800
• depth ............................................... mm 1140
• height ................................................. mm 970
- Shipping weight:
• STD version ...............kg 259.............. kg 269
• T.I. version .................kg 273.............. kg 283
MTS 20" - MTS 24"
- Machine packing dimensions:
• width .................................................. mm 760
• depth ............................................... mm 1060
• height ................................................. mm 970
- Shipping weight:
• in cardboard .......................................... kg 250
• in wood ................................................. Kg 260
Ambient conditions for storage and
transport
Temperature range from -25° to +55°
WARNING
Do not stack other goods on top of the packing
or damage may result.
Handling
To move the packed machine insert the forks of
a pallet truck in the channels in the base of the
pallet (fi g.1).
Before moving the machine refer to the chapter
HOISTING AND MOVING.
ATTENTION
Keep the packing material intact for possible
future transport of the machine.
Operator's manual MTS 20" - MTS 24" - A 2024
in cardboard in wood