Corghi A 2024 Manual De Uso página 31

DANGER
Before carrying out any maintenance operation
or topping up with lubricant, disconnect the
machine from the compressed air supply line.
Check the lubricant level periodically through
the windows provided and top up as shown in
fi g.25c. Top up only with SAE20 non detergent
oil to a total quantity of 50 cc.
The FR fi lter regulator unit is equipped with an
automatic system for drainage of the condensa-
tion water, so in normal conditions it does not
require any particular maintenance. However,
the water may be drained by hand at any time
(fi g.25d).
Normally it is not necessary to remove the cups,
but this may be necessary after long periods out of
use; if the cup cannot be removed with the hands
only, use the spanner provided (fi g.25e).
Clean with dry cloth. Avoid contact with sol-
vents.
ATTENTION
Keep the work area clean.
Do not clean the machine with compressed air
or jets of water.
When cleaning the area avoid raising dust as
far as possible.
DEMOLITION
If the machine is to be scrapped, remove all
electrical, electronic, plastic and metal parts and
dispose of them separately in accordance with
current provisions as prescribed by law.
Operator's manual MTS 20" - MTS 24" - A 2024
OIL - WARNINGS
AND
RECOMMENDATIONS
Disposal of used oil
Do not dispose of used oil into sewage mains,
storm drains, rivers or streams. Contact a spe-
cialised fi rm for disposal.
Oil spills and leaks
When the oil has been removed, degrease the
area with suitable solvents taking care to disperse
solvent fumes. Dispose of all residual cleaning
material in accordance with procedures as pre-
scribed by law.
Precautions when using oil
- Avoid contact with the skin.
- Avoid the formation and diffusion of oil mist
- Apply the following hygiene measures:
• protect personnel and equipment from
oil splashes (wear suitable clothing, install
screens on the machine)
• wash frequently with soap and water; do not
use cleaning products or solvents that irritate
the skin or remove its natural protective oil
• do not dry hands with dirty or greasy rags
• change clothing if impregnated with oil and in
any event at the end of each work shift
• do not smoke or eat when your hands are
greasy
- Apply the following preventive and protective
measures:
• wear lined industrial gloves designed to resist
mineral oils
• use safety goggles to protect the eyes
• use aprons resistant to mineral oil
• use protective screens to protect from oil
splashes
Mineral oil: First Aid procedures
- Ingestion: seek medical attention immediately
and provide all characteristics of the oil type
ingested.
- Inhalation: for exposure to high concentrations
of fumes or oil mist, move the affected person
to the open air and seek medical attention
immediately.
- Eyes: bathe with plenty of running water and
seek medical attention immediately.
- Skin: wash with soap and water.
EN
31