Kärcher KIRA CV 50 Manual Del Usuario página 24

3. Remove the battery pack.
Transport
CAUTION
Risk of injury or damage due to non-observance of
the weight
Be aware of the weight of the device during transporta-
tion.
Note
Before transport, both edges must be decoupled.
1. Lift up the tab on the decoupler, pull the tab and turn
it anticlockwise.
The wheel is decoupled.
2. Open the lid of the storage compartment for the tel-
escopic handle.
3. Press the unlocking button on the telescopic handle.
4. Pull the telescopic handle and remove it from the
device.
5. Use the telescopic handle to transport the unit.
6. After transport, push the telescopic handle back into
the device and close the lid of the storage compart-
ment.
24
7. Lift up the tab on the decoupler, press the decoupler
in via the tab and turn it clockwise.
The wheel is coupled.
CAUTION
Risk of injury or damage due to non-observance of
the weight
Be aware of the weight of the device during storage.
The device may only be stored indoors.
If the cleaning robot is not to be used for a longer period
of time, proceed as follows:
1. Charge the battery pack (see operating instructions
for the battery pack and charger).
2. Store the charged battery pack in a cool and dry
place.
Care and service
Maintenance intervals
Notifications appear on the display and in the app to re-
mind the user to maintain the device. The maintenance
intervals may differ, depending on how often the clean-
ing robot is used.
After each operation
1. Check the cleaning brush, the side brushes and the
wheels and clean them if necessary.
2. Charge the battery packs.
3. Check whether the dust container needs to be emp-
tied.
4. Clean the sensors with a moist, lint-free cloth. If nec-
essary, use additional glass cleaner.
1. Clean the filter and the pre-filter.
2. Clean the cleaning brush.
3. Clean the wheels.
Replacing upon wear
1. Replace the side brushes.
2. Replace the sweeping edge.
3. Replace the cleaning brush.
4. Replace the filter.
Maintenance work
Maintenance tasks as animation
Various maintenance tasks are stored as animations in
the device and can be called up on the display or in the
app, see chapter Help.
Dirt particles (e.g. sand.) can get stuck on the running
surface and then damage sensitive, smooth floor sur-
faces.
English
Storage
Weekly
Cleaning the wheels