Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
7. TIMER ON: Set the TIMER for AUTO START.
TIMER OFF: Set the TIMER for AUTO STOP.
8. DIRECT: Adjust the angle of the louvers 6 degrees at a time.
9. ECO: Once the selected temperature has been achieved, the compressor will turn off and
only the fan will work to continue circulating the air in the room.
10. CLEAN: START/STOP the CLEAN function.
11. TURBO: High fan speed brings the unit to set cooling temperature as soon as possible.
12. LOCK: Press DIRECT and TIMER OFF buttons at the same time for 5 seconds to lock the
remote buttons. This can prevent inadvertently making changes to the air
conditioner settings. Press DIRECT and TIMER OFF buttons at the same time for 2
seconds to unlock the keys.
13. LED DISPLAY: Press to turn off the LED Display on the indoor unit.
14. ˚C / ˚F SELECTOR: Press
Information is displayed when the remote controller is powered up.
NOTE: All indicators shown in the figure
are for information only. During
the actual operation, only the
relevant functions are shown on
the LED display.
Page 36
and
at the same time for 3 seconds to change temperature
units from Fahrenheit or Celsius.
Publicidad
