Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
CLEAN: Press CLEAN to activate. This function clears dust when it adheres to the heat
exchanger by automatically freezing and then rapidly thawing the frost. A "pi-pi"
sound will be heard. The CLEAN operation will produce more condensed water and
the cold air will blow out. After cleaning, the internal wind wheel then keeps operating
with hot air to blow-dry the evaporator, thus keeping the inside clean.
NOTE: This is a high temperature cleaning process, and the temperature of the air outlet is very
high. Keep away from the air outlet. The room temperature will also increase during this
time. When this function is activated, the indoor unit display window appears "CL ". The
process will take approximately 20 to 130 minutes and will turn off automatically.
TURBO: High fan speed brings the unit to set cooling temperature as soon as possible.
LOCK: Press DIRECT and TIMER OFF buttons at the same time for 5 seconds. to lock the
remote buttons. This can prevent inadvertently making changes to the air conditioner
settings. Press DIRECT and TIMER OFF buttons at the same time for 2 seconds to
unlock the keys.
LED DISPLAY: Press to turn off the LED Display on the indoor unit.
°C / ˚F SELECTOR:
Press
and
at the same time for 3 seconds to change temperature units from Fahrenheit
or Celsius.
OTHER FUNCTIONS:
If the unit loses power, it will automatically restart with the prior settings once power has been
restored.
Page 39
Publicidad
