Nordcap SDE Serie Manual Del Usuario página 7

SAUGA SIGURTÀ
DROŠĪBA VEILIGHEID
SAFETY
EN
Pictogram explanation
Indicates that caution is required when
performing an operation described in a
paragraph that bears this symbol. The symbol
also indicates that maximum operator
awareness is required in order to avoid unwanted
or dangerous consequences
Indicates important information to be read and
complied with.
Indicates requirements relating to actions that
must be avoided.
This symbol placed on the appliance or used in
the manual identifies the areas with an electrical
hazard.
Indicates grounding
Indicates that it is necessary to read carefully
the paragraph marked with this symbol before
installing, using and maintaining the product
Safety warnings
Partial or total non-compliance with these instructions
and following prescriptions, improper installation, use,
ordinary or extraordinary maintenance or other than those
indicated in the manual or the tampering with or modification
of the appliance or some of its parts (unless expressly
authorized), use of non-original or non-specific spare parts
for the model, unauthorized interventions:
• can cause damage, injury
• void the warranty
• reduce or compromise the quality and safety
characteristics of the appliance;
• release the Manufacturer from any liability.
It is absolutely forbidden to tamper with or remove the
safety devices adopted (protective grids, danger
stickers, etc.). The Manufacturer declines all responsibility if
the above instructions are not complied with.
If you have not understood all the contents of this manual,
contact your local distributor or Dealer before working on the
appliance.
INTENDED USE AND CLASSIFICATION
This appliance is an ice maker and must only be used for
making ice (not as a container for bottles, cans, etc.).
The appliance is designed to be used in
domestic and similar applications such as:
BEZPIECZEŃSTWO
SEGURANÇA БЕЗОПАСНОСТЬ
or
death;
SIGURANȚĂ BEZPEČNOSŤ
VARNOST
• the kitchen area for staff in shops, offices and
other work environments;
• farms and by customers in hotels, motels and
other residential-type environments;
• bed and breakfasts;
• catering services and similar applications, not
for retail.
GENERAL INSTALLATION
WARNINGS
The pages identified with this symbol are mainly addressed
to the installer and to the installation and maintenance
personnel, who must read them carefully before working on
the appliance.
Installation must be performed by authorized
and specialized personnel, complying with
the instructions in this manual.
Personnel must be adequately trained and instruct-
ed on how to assemble the machine and how to
operate on electrical and refrigeration systems.
The customer can under NO circumstances
perform the operations described in this section.
Before installation:
check the compliance of the systems with the
•
regulations in force in the country of use and
with what is stated on the serial plate;
check that you are familiar with all the safety
•
and fire prevention regulations in force in the
country of use;
check that a high sensitivity (30 mA) differential
•
magnetothermic switch to which the machine
must be connected and a power socket with
ground connection of the type used in the
country of use have already been prepared in
the vicinity of the appliance.
When installing the machine, ALWAYS replace
the existing water supply pipes with the new
ones supplied with the equipment.
The appliance must be connected to a water
supply in order to load the water needed to
create the ice cubes; this water must be drinkable.
The electrical connection system must have
an easily accessible magneto-thermal ON/
OFF switch, with suitable fuses (see the data
plate) and with a contact opening distance
such as to guarantee complete disconnection
in the conditions of category III overvoltage.
Disconnection devices must be incorporated into
‫األمان والسالمة‬
SÄKERHET
安全
7