Balluff BMD 1L-K Serie Manual De Instrucciones página 166

7 Set up with the display and adjustment module
Additional settings - Scal-
ing level
Additional settings -
Scaling level - Scaling
variable
Additional settings - Scal-
ing level - Scaling format
Additional settings - Scal-
ing interface
52
The copied data are permanently saved in an EEPROM memory in
the display and adjustment module and remain there even in case of
power failure. From there, they can be written into one or more sen-
sors or kept as backup for a possible electronics exchange.
Note:
Before the data are stored in the sensor, a check is carried out to
is triggered or the function is blocked. When data are being written
into the sensor, the display shows which instrument type the data
originate from and which TAG-no. this sensor had.
Tip:
We recommend to save the instrument adjustments. In case of an
electronics exchange the saved parameter adjustment data relieve
this process.
Since scaling is very extensive, scaling of the level value was divided
into two menu items.
In menu item "Scaling variable
the scaling unit for the level value on the display, e.g. volume in l.
In menu item "Scaling format
Since scaling is very extensive, scaling of the interface value was
divided into two menu items.