Balluff BMD 1L-K Serie Manual De Instrucciones página 165

Menu - Diagnosis
Menu
Diagnostics
Diagnostics
Menu - Additional adjustments
Menu
Additional settings
Additional settings - Copy
instrument settings
Menu item
Status signals - Function control
Status signals - Maintenance
Device memory - Echo curve memory
Device memory - Measured value memory
Device memory - Measured value memory -
Measured values
Device memory - Measured value memory - Re-
cording in time interval
Device memory - Measured value memory - Re-
Device memory - Measured value memory - Start
with measured value
Device memory - Measured value memory - Stop
with measured value
Device memory - Measured value memory - Stop
recording when memory is full
Menu item
PIN
Date
Time
Time - Format
Probe type
The instrument settings are copied with this function. The following
functions are available:
•
Read from sensor: Read data from sensor and save in the display
and adjustment module
•
Write to sensor: Save data from the display and adjustment mod-
ule back into the sensor
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "Setup" and "Display"
•
In the menu "Additional adjustments" the items "Reset, Date/Time"
•
Special parameters
7 Set up with the display and adjustment module
Default value
Switched on
Switched on
Stopped
Started
Distance level, percentage val-
ue level, reliability level, electronics
temperature
3 min.
Not active
Not active
Not active
Default value
0000
Actual date
Actual time
24 hours
Analogue current output
51