Balluff BMD 1L-K Serie Manual De Instrucciones página 135

Lateral installation
1
2
Fig. 11: Fasten the probe
1 Measuring probe
2 Retaining sleeve
mounted laterally. For this, adapt the rod with rod extensions or
angled segments.
To compensate for the resulting changes in signal runtime, let the
instrument determine the probe length automatically.
The determined probe length can deviate from the actual probe
length when using curved or angled segments.
If internal installations such as struts, ladders, etc. are present on the
vessel wall, the measuring probe should be mounted at least 300 mm
the rod extension.
4 Mounting
1
2
21