Balluff BMD 1L-K Serie Manual De Instrucciones página 189

Fault signal, current output (adjustable)
Max. output current
Starting current
Load
adjustable
Indication value - Display and adjustment module
Displayed value 1
Displayed value 2
Resolution, digital
Accuracy (according to DIN EN 60770-1)
Temperature
Relative humidity
Air pressure
Mounting, reference conditions
Min. distance to internal installations
Vessel
Medium
Mounting
Sensor parameter adjustment
The indication values can be assigned individually.
3)
With interface measurement = 2.0
4)
21.5 mA
Load resistor, see chapter "Voltage supply"
0 ... 999 s
3)
Filling height Level
Electronics temperature
< 1 mm (0.039 in)
(+12.5 ... +15.4 psig)
> 500 mm (19.69 in)
Water/Oil (dielectric constant ~2.0)
Probe end does not touch the vessel bottom
No gating out of false signals carried out
12 Supplement
-
4)
75