Supplement; Technical Data - Balluff BMD 1L-K Serie Manual De Instrucciones

12 Supplement

12 Supplement

12.1 Technical data

General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Process seal on the instrument side
(cable/rod leadthrough)
Process seal
Rod: ø 12 mm (0.472 in)
Cable: ø 2 mm (0.079 in)
Cable: ø 4 mm (0.157 in)
Inner conductor (up to the cable)
Gravity weight (optionally available)
Centering weight (optionally available) 316L
Materials, non-wetted parts
Stainless steel housing (electropol-
ished)
Second Line of Defense (optional)
Seal between housing and housing lid
Inspection window in housing cover
(optional)
Ground terminal
Cable gland
Sealing, cable gland
Blind plug, cable gland
Second Line of Defense (optional)
The Second Line of Defense (SLOD)
is a second level of the process
separation in the form of a gas-tight
feedthrough in the lower part of the
housing, preventing product from
penetrating into the housing.
Supporting material
Glass potting
72
316L and PPS GF 40
304L and PEEK, 316L and PEEK, Alloy C22 (2.4602)
(1.4462) and PEEK, Alloy 400 (2.4360) and PTFE
DM (A+P 75.5/KW75F), silicone FEP coated (A+P FEP-
O-SEAL)
On site (instruments with thread: Klingersil C-4400 is
enclosed)
Duplex steel (1.4462)
316L, Alloy C22 (2.4602), Alloy 400 (2.4360)
316 (1.4401), Alloy C22 (2.4602), PFA
316L
316L
316L
Borosilicate glass GPC 540 with 316L and Alloy C22
(2.4602)
Polycarbonate (with Ex d version: glass)
316L
PA, stainless steel, brass
NBR
PA
316L
Borosilicate glass GPC 540
-