Balluff BMD 1L-K Serie Manual De Instrucciones página 158

7 Set up with the display and adjustment module
Display
Display - Menu language
Display - Displayed value
1
Display - Displayed value
2
Display - Display format
44
The additional current output cannot be used as an output in the
sense of a safety-instrumented application (SIL).
The procedure corresponds to the previous settings of the standard
current output. See "Setup - Current output".
In the main menu point "Display", the individual submenu points
should be selected one after the other and provided with the correct
parameters to ensure optimum adjustment of the display options. The
procedure is described in the following.
The following submenu points are available:
The submenu points are described below.
This menu item enables the setting of the requested national lan-
guage.
In delivery status, the sensor is set to the ordered national language.
The default setting for the displayed value 1 is "Filling height Level".
The default setting for the displayed value 2 is the electronics tem-
perature.
two measured values.
value is displayed with.