Publicidad
Idiomas disponibles
Idiomas disponibles
6. Gett ing started
Before using for the first time, ensure you read
the "Safety instructions" section.
6.1. Unpacking
•
Select a suitable place for setting up the device before
unpacking.
•
Open the box very carefully, to avoid damaging the
device. The device might get damaged if you use a
knife with a long blade to open the box.
•
The box contains a number of small items (including
batteries). Keep these out of the reach of children, as
they represent a choking hazard.
•
Store the packaging material in a safe place. Only use
this box to transport the TV.
DANGER!
Risk of choking and suffocation!
Packaging film can be swallowed or
used improperly, creating a risk of
choking and suffocation.
Keep packaging material such as
plastic film or plastic bags away
from children.
6.2. Mounting
Attach the feet as shown in the illustration. Carry out this
step before connecting the Smart TV.
6.3. Inserting batt eries in the re-
Remove the battery compartment cover on the back
of the remote control.
Insert two LR03 (AAA) 1.5 V batteries in the battery
compartment of the remote control. Check the battery
polarity (see label on the bottom of the battery com-
partment).
Close the battery compartment.
6.4. Connecting the antenna
Your smart TV supports different antenna signals.
You can input the following image signals to the television
through the socket labelled ANT.:
•
Via analogue cable/an analogue house aerial
•
Via a DVB-T2/ DVB-T
•
Via a DVB-C
Insert the antenna cable either from the house aerial/
analogue cable connection, a DVB-T antenna or the
DVB-C connection in the antenna socket on the Smart
TV.
You also have the option of connecting a digital satellite
system to the socket labelled LNB.
Screw a coaxial antenna cable's F connector onto the
connector on the Smart TV.
2 x M5x20
6.5. Connecting the power supply
Connect the supplied power cord to the mains con-
nection socket of the device.
Connect the mains plug on the device to an easily ac-
cessible 220 to 240 V ~ 50 Hz mains socket.
1
This service must be available in your region.
mote control
NOTICE!
Risk of damage!
The remote control can be damaged
by leaking batteries if not used for a
long period of time!
Remove the batteries from the re-
mote control if the device is not go-
ing to be used for a long period.
1
antenna or
2
connection (digital cable connection)
To receive encrypted/subscription channels
you will need to use a CI module and an ap-
propriate card. Insert a CI module (available in
specialist shops) into the slot provided for this
purpose on the left-hand side of the device
(Common Interface). You can then insert the
card from your provider into the CI module.
DE
FR
IT
NL
EN
ES
11
Publicidad
