Medion LIFE P13207 Manual De Operación página 198

10.4.5. Installation menu
Installation
Automatic channel scan
Manual channel scan
Network channel scan
Analogue fine tune
Satellite Settings
Installation Settings
Signal Information
First time installation
AUTOMATIC CHANNEL SCAN
The automatic station search function helps you to search
for and save new channels on your TV.
A number of search options are available.
Once you have selected the search option, press O K .
Press YES to confirm the query and press O K to start the
station search.
(M E N U ) to cancel the search prematurely. In
Press
this case, any found channels will not be saved.
MANUAL CHANNEL SCAN
This function is used for the direct entry of station or satel-
lite transponder data.
– SEARCH TYPE
Set the desired reception type here.
SATELLITE
– FREQUENCY
The number buttons can be used to specify
the frequency to be searched.
– POLARISATION
Select the polarisation level here.
– SYMBOL RATE
Set the baud rate.
– NETWORK CHANNEL SCAN
Activate/deactivate the network scan.
– SATELLITE
Select the satellite on which the search will be
started.
ANALOGUE
– BAND
Select the desired frequency band S or C.
– TV SYSTEM
Set the desired TV system here (BG, I, DK).
The sound system set for Germany is BG.
– CHANNEL
Select the channel number for which you want
to carry out a search.
26
– FREQUENCY
Displays the frequency of the current station.
The number buttons can be used to specify
the frequency to be searched.
D. AERIAL
– CHANNEL
Select the channel number for which you want
to carry out a search.
– FREQUENCY
Displays the frequency of the current station.
The number buttons can be used to specify
the frequency to be searched.
– NETWORK CHANNEL SCAN
Activate/deactivate the network scan
D. CABLE
– FREQUENCY
The number buttons can be used to specify
the frequency to be searched.
– MODULATION
Set the modulation
– SYMBOL RATE
Set the baud rate
– NETWORK CHANNEL SCAN
Activate/deactivate the network scan
NETWORK CHANNEL SCAN
Select between digital cable or DVB-T station groups. This
searches for related channels of the currently selected sta-
tion. The information sent in this respect depends on the
selected channel and leads to different results.
The existing channel list is replaced when the
network search is started.
ANALOGUE FINE TUNE
Here you can fine-tune analogue channels.
SATELLITE SETTINGS
– SATELLITE LIST
Display satellite list
Use the  buttons to select a satellite from
the list. Press the O K button to call up the
ADD, EDIT and DELETE options.
– ANTENNAINSTALLATION
In this section, you can change the antenna
settings and search satellites for new channels.
Select a satellite and press the OK button.
Then the TRANSPONDER LIST, SCAN FOR
SERVICES, SAVE AND EXIT and CONFIGU
RE LNB options appear for further editing. Un-
der CONFIGURE LNB you can make and save
settings under LOWER LNB OSCILLATORS
and UPPER LNB OSCILLATORS (SAVE). The
RESET option can be used to reset all values to
the default settings
– SATELLITE CHANNEL TABLE
This menu item allows you to export or import
the existing satellite station list. Connect a
removable storage medium (USB stick) to save
the satellite station list onto it or update the
list from the storage medium.