Publicidad
Idiomas disponibles
Idiomas disponibles
– HEADPHONE
Set the headphone volume here. This can
only be changed if SOUND OUTPUT is set to
HEADPHONE ONLY.
WARNING!
Risk of hearing damage!
To prevent possible damage to your
hearing, avoid listening at high volume
over long periods of time.
Before pressing play, set the volume
to the lowest setting.
Start playback and increase the vol-
ume to a comfortable level.
– BALANCE
Set the balance between the left and right
speakers (on a scale of -50 to +50).
The default setting is and can only be changed
if the option DOLBY AUDIO is disabled (OFF).
– RESET
Press O K to reset all sound settings to the
factory defaults.
10.4.4. Network menu
Network
Network Type
Scan Wireless Networks
Disconnect
Press WPS on your wifi router
Internet Speed Test
Advanced Settings
Networked Standby Mode
Connected
123.456.789.000
MAC: 11:2d:bb:33:ad:44
Wohnzimmer
NETWORK TYPE
Use to select the network type WIRELESS DEVICE,
WIRED DEVICE or DISABLED.
SCAN WIRELESS NETWORKS
(optional WLAN)
Pressing the O K button displays an overview of all avail-
able networks. Make a selection using the buttons
and press the O K button to confirm. If a password is
required for a network, a virtual keyboard appears which
you can use to enter this with the help of the direction
buttons and the O K button. After entering the
password, select OK on the keyboard and press the O K
button to confirm.
DISCONNECT
Disable network connection
PRESS WPS ON YOUR WIFI ROUTER
(only for WLAN)
This option enables you to quickly establish a WPS con-
nection via a wireless network (WLAN). Press and hold the
WPS button on your router and confirm with the O K but-
ton. Then the WPS connection is established.
INTERNET SPEED TEST
Press the O K button to test the speed of the internet
connection.
ADVANCED SETTINGS
Press the O K button to call up further network configura-
tion options.
NETWORKED STANDBY MODE
Activate/deactivate the Wake-On LAN/Wake-On Wireless
Wireless Device
LAN function (WoL/WoWLAN). This enables you to switch
on the Smart TV via a different device. Both devices must
be connected to the same network via LAN or WLAN for
this purpose. Select the ON setting to activate the func-
tion. The device being used as a remote control must be
connected to the TV set once when it is switched on. The
control function only works when the TV is in standby
On
mode.
WLAN
– IP CONFIGURATION
Select the AUTOMATIC or MANUAL setting
here. If MANUAL is selected, three additional
lines appear, where the IP ADDRESS, SUB
NET MASK and DEFAULT GATEWAY data
can be entered manually with the aid of the di-
rection buttons and the number buttons.
– DNS CONFIGURATION
Choose between AUTOMATIC or MANUAL
here. If MANUAL is selected, two additional
lines appear, where the DNS SERVER and
DNS SERVER data can be entered manually
with the aid of the direction buttons and
the number buttons.
DE
FR
IT
NL
EN
ES
25
Publicidad
