Medion LIFE P13207 Manual De Operación página 194

10.4. Sett ings menu
10.4.1. Devices menu
Devices
CEC CEC
CEC Auto Power On
Audio Link
Input Device
Virtual Remote
Audio Video Sharing
Timer of No Signal
CEC (Consumer Electronics Control)
To connect the device to a CEC network, make the re-
quired settings here.
Enable this function to allow all devices that are connect-
ed via HDMI to communicate with each other. In this way,
you can, for example, control the basic functions of all de-
vices in an HDMI network using only one remote control.
Activate this function if you want to configure additional
settings under SOUND > SOUND OUTPUT.
First select the CEC function and select HDMI as the
source. If you have already connected a CEC-enabled de-
vice, the name of the device is listed instead of HDMI. The
basic functions of the device can then be automatically
controlled using the remote control of the Smart TV.
If the CEC function is activated and HDMI has
been selected as the source (CEC-enabled de-
vice connected), the OSD menu of the Smart
TV may no longer be called up using the
(M E N U ) button. In this case, press and hold
0. The remote control then controls the TV
again. Pressing and holding again then ena-
bles the control of the device connected by
HDMI.
CEC AUTO POWER ON
This function allows you to turn on the TV with the con-
nected HDMI-CEC-compatible device and automatically
switch to the input source. Select ENABLED if you want to
use this function.
AUDIO LINK
Here you can enable or disable the Bluetooth function
of the device. With Audio Link enabled, it is possible to
pair the TV set wirelessly with Bluetooth speakers (e.g. a
soundbar). Select AUDIO LINK and press the O K but-
ton.
22
< >
Enabled Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
Enabled
– DEVICE
Select the ENABLED setting if you want to
connect the device to an external speaker
via Bluetooth. Then press the O K button to
search for available Bluetooth connections.
All found connections are then displayed. Use
 to select the desired device and press
O K to pair the speaker or speaker system
with the TV set.
Due to the great variety of different Blue-
tooth devices, faultless functionality cannot
be guaranteed. Please also read the opera-
ting instructions of the device that you wish
to connect to the TV. The device to be con-
nected must be in search mode.
To disconnect the connection again, select the
DISABLED setting.
INPUT DEVICE
Option to connect external Bluetooth devices.
– MODE
Select the ENABLED setting if you want to
connect the device to an external Bluetooth
device via Bluetooth. Then press the O K
button to search for available Bluetooth con-
nections. All found connections are then dis-
played. Use  to select the desired device
and press O K to connect.
Due to the great variety of different devices,
faultless functionality cannot be guaranteed.
To disconnect the connection again, select the
DISABLED setting.
VIRTUAL REMOTE
Activate/deactivate the virtual remote control. This func-
tion must be activated if you wish to operate the TV re-
motely via a smartphone
AUDIO VIDEO SHARING
Switch audio-video sharing on/off. This function allows
data exchange with other multimedia devices such as PCs,
smartphones, cameras, etc. See section "Using the video
audio sharing network service".
If you disable the AUDIO VIDEO SHARING
function, it will no longer be possible to dis-
play audio, video or photo files on the Smart
TV. The DMR function (Digital Media Renderer)
is then switched off.
TIMER OF NO SIGNAL
If your television does not receive an input signal (e.g.
from an antenna or HDMI source) for 3 minutes, the te-
levision switches into standby mode. You can activate or
deactivate this option.