Publicidad
Idiomas disponibles
Idiomas disponibles
During the search, the scan progress is displayed. In ad-
dition, the number of found TV and radio stations is dis-
played.
Afterwards, press O K to continue.
Amazon Alexa (optional): The device can be controlled
using Amazon Alexa. For more information, please
refer to the description under SYSTEM > VOICE AS
SISTANT.
At the end of automatic program storage, a TV pro-
gramme is shown.
The initial installation described here corre-
sponds to the FIRST TIME INSTALLATION
option in the INSTALLATION menu.
6.8. Using the multimedia connec-
tions
NOTICE!
Risk of damage!
Incorrect operation can cause damage
to the equipment used.
Before wiring and first use, you
must also read the operating in-
structions of the devices you are
connecting. Take care to ensure that
all devices are switched off during
wiring.
NOTICE!
Risk of damage!
If plugs and sockets are connected
incorrectly it can cause damage to the
contacts.
Take care to ensure that the plugs
and corresponding sockets fit to-
gether precisely in order to avoid
any damage to the contacts. Due
to the arrangement of the contacts,
many plugs will only fit into the
socket in one position.
6.8.1.
AV
The AV transmission (composite) works via three cinch
connections, of which one transmits the video signal (yel-
low) and two transmit the stereo audio signal (red/white).
Use a standard AV cable.
Connect the AV output of the playback device with the
AV input of the TV.
6.8.2. HDMI
HDMI (High Definition Multimedia Interface) is an inter-
face for digital video and audio transmission. It has the
highest quality of transmission. Use a standard HDMI
cable:
Connect the corresponding HDMI ports of the devices
used with an HDMI cable.
14
6.8.3. HDMI ARC (Audio Return Channel)
If you want to use a TV set as a signal receiver AND signal
source (to transmit an audio signal to an audio receiver),
you must use the HDMI2 port with audio return channel
(ARC). The HDMI connection to the TV then works in both
directions. It can receive image and sound signals from a
video device and the audio signal of the TV set can also be
sent to the audio receive via the audio return channel.
Connect the video device (e.g. Blu-ray player) to the
audio receiver via HDMI.
Connect the audio receiver to the TV set via HDMI/
ARC.
Take care to ensure that the speaker control of the TV
set is routed to the external amplifier.
6.8.4. HDMI CEC (Consumer Electronics
Control)
CEC is the abbreviation for Consumer Electronics Control.
If you connect different devices via CEC-enabled HDMI
connections, you can control certain functions of the
entire HDMI network with a single remote control (e.g.
standby or record functions):
Connect all devices via CEC-enabled HDMI ports with
HDMI cables. The HDMI ports on your TV set are all
CEC-enabled.
Take care to ensure that the CEC functions are enabled
for all ports and that all devices are connected accord-
ingly.
6.8.5. USB
A USB port can be used to connect and read storage
media such as USB sticks or external hard drives. Use a
suitable USB cable. If a suitable USB cable is supplied, you
should use this (e.g. for hard drives). Always verify the
power consumption of the USB storage medium used and
use the corresponding USB connections.
Connect the corresponding USB ports of the devices
used with a suitable USB cable. Whenever possible, do
not use a USB extension cord as this can cause prob-
lems, depending on the voltage.
6.8.6. SPDIF
SPDIF (Sony
/Phillips digital interface) is an interface for
®
transferring digital stereo or multi-channel audio signals
between various devices. Usually, the digital audio signal
is output via a coaxial (cinch) or an optical connection.
Your TV features an optical SPDIF port. Use a standard, op-
tical SPDIF cable.
Connect the corresponding SPDIF ports of the devices
used with a corresponding SPDIF cable.
6.8.7. VGA (PC)
You can connect a PC with a monitor/TV to transmit the
video signal via the VGA port. Use a standard VGA cable.
Connect the corresponding VGA ports of the devices
used with a VGA cable.
6.8.8. VGA (YPbPr)
The VGA connection of your TV can be used for the video
transmission of the YPbPr signal. Use a suitable YPbPr
adapter.
Publicidad
