Motorola APX NEXT XN Guia Del Usuario página 125

Chapter 38
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used channels
for conventional or trunking. With Dynamic Zone, you can select channels from different zones without first
switching to that particular zone to select a channel.
NOTE: Your radio must be preprogrammed to use this feature. At least one zone in the radio must be a
non-dynamic zone.
38.1
Selecting Channels in the Dynamic Zone
Procedure:
From the menu, enter a Dynamic Zone by performing one of the following options:
Option
38.2
Managing Channels in the Dynamic Zone
Prerequisites: Ensure that the Dynamic Zone Programming feature is enabled in the codeplug to be
displayed in the Menu Feature Launcher.
Procedure:
1. Enter the Dynamic Zone by performing the following actions:
a. From the Home screen, tap the Radio Control Widget.
b. Tap the Dynamic Zone.
c. Tap a channel or any blank channel.
2. From the Home screen, tap
3. Tap Zone Prgm.
Actions
a. Slide the ABC Programmable Switch to the
required position.
b. Select the required channel using the Chan-
nel Selector.
a. From the Home screen, tap the Radio Con-
trol Widget.
b. Select the Dynamic Zone followed by the re-
quired channel.
More.
MN008401A01-AF
Chapter 38: Dynamic Zone Programming
125