Motorola APX NEXT XN Guia Del Usuario página 28

MN008401A01-AF
Chapter 5: Getting Started
Chapter 5
Getting Started
This section provides instructions to prepare your radio for use.
5.1
Attaching and Removing the Battery
The radio notifies you if it detects a non-Motorola Solutions battery when it is powering up, charging, or
removed from the charger.
NOTE: Your radio is only compatible and certified with PMNN4812_, 3400 mAh Li-Ion IMPRES 2 UL
Div 2 Battery, manufactured by Motorola Solutions. Other batteries are incompatible and do not work
due to the lock-out feature.
Attaching the Battery
Prerequisites: Ensure that the radio and battery seal interface is clean and free of foreign material.
Procedure:
To attach the battery, align the battery with the bottom rails on the back of the radio. Slide the battery into
the radio frame until the side latches click into place.
Result:
Removing the Battery
Procedure:
To remove the battery, perform the following actions:
a. Press the latches on both sides.
b. Pull the battery away from the radio.
Result:
28