Function
Unprogrammed
User
Voice Announcement
Voice Mute
Volume Set Tone
Zone Bank Up
Zone Bank Down
Zone Select
3.2
ViQi
ViQi is a virtual assistant that helps you manage your radio and perform information lookups using voice
commands. This feature is purpose-built for public safety and is active when you press the assigned ViQi
button on the radio or an associated Remote Speaker Microphone (RSM).
ViQi Voice Control
ViQi Voice Control allows you to operate the radio with your voice, for example, to change zones, channels,
or volume.
NOTE: Voice Control follows the language that you set in the device. If you changed the device
language in RadioCentral or Customer Programming Software (CPS), your device automatically
downloads the new language files for this feature through LTE or Wi-Fi. This feature is disabled until the
languages files are downloaded successfully. Therefore, retry if your download fails.
Table 5: ViQi Voice Control Commands
The following table shows the functions supported by the ViQi Voice Control feature and their respective
commands.
Feature
Zone and Channel
Zone
Description
Select this feature for a radio button that is not in use.
Allows you to log on to the server with a personally identifiable
user name.
Audibly indicates the current feature mode, zone, or channel that
you are assigned to.
Allows you to mute the voice transmission of the current zone
and channel.
Sets the volume set tone.
Scrolls through the zone banks in ascending order.
Scrolls through the zone banks in descending order.
Allows you to select a zone from the switch.
Examples
To identify your current zone and channel, say:
●
"What is my zone and channel"
●
"Current zone and channel"
●
"Zone and channel"
To change to a new zone and channel, say:
●
"Zone <zone name>, channel <channel name>"
●
"Change zone to <zone name>, channel to <channel name>"
●
"Switch zone to <zone name>, channel to <channel name>"
To identify your current zone, say:
MN008401A01-AF
Chapter 3: Radio Overview
23