Descargar Imprimir esta página

KIKKA BOO TIFFANY Instrucciones De Uso página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
IMPORTANT-READ CAREFULLY AND KEEP FOR
EN
FUTURE REFERENCE.
WARNING!
Never leave the child unattended.
This product is suitable from birth to weight of the child up to 15 kg or 3 years, whichever comes first.
Ensure that all the locking devices are engaged before use.
To avoid injury ensure that the child is kept away when unfolding and folding this product.
Do not let the child play with this product.
Use a harness as soon as the child can sit unaided.
Always use the restraint system.
Check that pram body or seat unit or car seat attachment devices are correctly engaged before use.
This product is not suitable for running or skating.
This product is designed to be used from baby's birth. You shall use the most reclined position for new born babies. The newborn child is not able to sit and hold his
/her head up unassisted. Therefore do not fix the backrest in sitting position for children under 6 months.
No additional mattress/ cushion shall be added.
This carry cot is intended for a child who cannot sit up unassisted, turn over or get up on their hand and knees. Maximum weight of the child: 9 kg
When using the car seat: the car seats is not mean to replace a cot or a bed. If your child need to sleep, you need to place them in a suitable pram body, cot or bed.
Only spare parts delivered or recommended by the manufacturer/ distributor can be used.
Keep all plastic package away from children to avoid risk of suffocation.
• Parking device shall be engaged when placing and removing the children.
• The shopping basket can take a maximum load of 2 kg.
• Any load attached to the handle and / or on the back of the backrest and / or the sides of the vehicle will affect the stability of the vehicle. Maximum load of the
accessory bag 1 kg. Do not hang any additional bags.
• Regularly check for loose parts. Make routine inspection, regularly maintain, clean and/ or wash the vehicle.
• The vehicle shall be used only for one child.
• Accessories which are not approved by the manufacturer shall not be used.
• Make sure that the safety belts are placed properly.
• Only spare parts delivered or recommended by the manufacturer/ distributor shall be used.
SAFETY INSTRUCTIONS WHEN USING THE CARRYCOT WITH THE STROLLER
WARNING!
Only use on a firm, horizontal level, flat and dry surface.
Do not let other children play unattended near the carrycot.
Do not use if any part of the carrycot is broken, torn or missing.
Never use this product on a stand.
KEEP AWAY FROM THE FIRE!
Additional information:
This product is suitable only for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. Maximum weight of the child: 9 kg.
Only use replacement parts supplied or approved by the manufacturer.
Do not place the carry cot near an open fire or other source of strong heat.
The handle(s) and the bottom of the carry cot should be inspected regularly for signs of damage and wear.
Before carrying or lifting the product make sure that the handle is in correct position of use.
Please, make sure that the head of the child in the carry cot should never be lower than the body of the child.
Be aware of hazard of hitting the baby e.g. when putting on floor, going through doors.
Do not add another mattress on top of the mattress provided with the carry cot.
Do not leave anything in the carry cot that could present a danger of suffocation (e.g. non-rigid toys, pillows).
Do not place the carry cot close to another product, which could present a danger of strangulation, e.g. strings, blind/curtain cords.
Take into account the ambient temperature and the child's clothing and ensure that the child is not too cold or too warm.
Ask a health professional for advice on safe sleeping.
PARTS: 1. Telescopic push handle; 2. Folding handle; 3. Seat releasing button; 4. Shopping basket; 5. Rear wheel brake pedall;
6. Rear wheel; 7. Front wheel; 8. Front wheel quick-release paddle; 9. Front wheel orientation; 10. Footrest; 11. Safety belts;
12. Front armrest quick-release button; 13. Front armrest; 14. Canopy
ATTENTION!
Before installation, please check all parts are included in the package. For any missing or defective parts, please contact the customer service immediately.
To guarantee the service life of the stroller, please use it correctly under the instructions and make a thorough inspection regularly.
I. UNFOLDING THE STROLLER
Put the frame on ground as shown in the picture.( Figure 1).Switch off the folding lock. Grab the handle and put it upward to spread the frame out.The stroller is fully unfold-
ed when you hear the '' c lick' sound.( Figure 2).
II. WHEELS INSTALLATION
FRONT WHEELS Lift the front frame up and fully insert the front wheel into the mounting hole beneath the frame. Repeat the step for the other front wheel. Before use,
please pull the front wheels downward to check whether they are properly installed. (Figure 1).
REAR WHEELS Insert the rear wheel into the mounting hole at the side of the frame as shown in the picture.( Figure 2). Repeat the step for the other rear wheel. Before use,
please pull the rear wheels outward to check whether they are properly installed.
III. INSTALLATION & UNFOLDING OF THE SEAT
SEAT INSTALLATION: Insert both ends of the seat to the frame until hearing a "click" sound. Before use, please pull the two ends of seat upward to check whether they are
ENGLISH
IMPORTANT-READ CAREFULLY AND KEEP FOR
EN
FUTURE REFERENCE.
properly installed.( Fig. 1)
SEAT UNFOLDING: 1. Unfold the seat as shown in the picture. With one hand press the backrest button. With the other hand push the seat outward. 2. Adjust the
position according to your need. (Fig.2)
IV. CANOPY & ARMREST INSTALLATION
CANOPY INSTALLATION: Zip up the zippers on both the canopy and the sleeping basket. Insert both ends of the canopy to the holes on seat frame until hearing a "click"
sound. Before use, please pull the two ends of canopy upward to check whether they are properly installed. (Fig.1)
ARMREST INSTALLATION: Insert both ends of the armrest to the seat until hearing a "click"sound. Please pull the two ends of armrest upward to check whether they are
properly installed. (Fig.2)
V. FRONT WHEELS ORIENTATION
Lift up the paddle(Fig.1) to orient the front wheels(now the wheel is locked), and push it down to release the orientation(now the wheel is unlocked and free to move).
VI. CANOPY ADJUSTMENT
Open the zipper, the canopy can be folded or open directly by pulling as pictures show.(Folding the canopy - Fig.1), (Unfolding the canopy - Fig.2)
VII. WHEELS QUICK RELEASE
FRONT WHEEL QUICK RELEASE(Fig.1): Press the quick-release paddle and pull downward the front wheel as shown in the picture.
REAR WHEEL QUICK RELEASE(Fig.2): Press the quick-release paddle and pull outward the rear wheel as shown in the picture.
VIII.REAR WHEEL BRAKE
Step the brake bar downward and the wheels will be stopped by the brake.Lift the brake upward to release the brake.
IX. BACKREST ADJUSTMENT
Use the backrest adjusting button to adjust the seat position as shown in the picture. The backrest can be adjusted to three different positions.
X. FOOTREST ADJUSTMENT
Press the buttons on both sides of the footrest to adjust the seat position as shown in the picture.
XI. SAFETY BELTS USE
We apply the five-points safety belt to ensure baby' s safety.The belts can be adjusted according to the baby' s need. Press the red button to release the safety belt as
shown in the picture.
XII. REVERSE THE SEAT
Grab up the two buttons as shown in the picture to remove the seat.(Fig.1) Turn the seat to the other side and re-install it(Fig.2).
XIII. SLEEPING BASKET & CAR SEAT INSTALLATION
SLEEPING BASKET INSTALLATION(Fig.1): Insert both ends of the sleeping basket to the frame until hearing a "click" sound. Pull the two ends of sleeping basket upward
to check whether they are properly installed.
CAR SEAT INSTALLATION (Fig.2): Insert both ends of the adaptor to the frame until hearing a "click" sound.Then insert both ends of the car seat to the adaptor until
hearing a "click" sound. Pull the two ends of the car seat upward to check whether they are properly installed.
XIV. SLEEPING BASKET POSITION ADJUSTMENT
Push the sleeping basket adjusting button to adjust the sleeping basket position(Fig.1). The sleeping basket can be adjusted to three different positions (Fig.2).
XV. SAFETY BELTS USE
We apply the five-points safety belt to ensure baby' s safety. The belts can be adjusted according to the baby' s needs. Press the red button to release the safety belt.
XVI. FOLDING OF THE STROLLER
1.Remove the sleeping basket first.( Fig.1) Grasp the backrest adjusting button, then fold the backrest and seat as shown in the picture.; 2. Rotate the backrest and seat
and make them parallel to the handle as shown in the picture(Fig.2) .; 3. Press the button on handle, pull up the folding bars on both sides as shown in the picture and
push the handle downward(Fig.3).;
4.Lock the frame(Fig.4).
MAINTENANCE & CLEANING
IIt is recommended to inspect the stroller regularly.
Do not place heavy objects on top of the stroller.
Do not apply corrosive detergents.
For dust and general stains, it is recommended to wipe with a damp cloth.
Use mild detergent.
Seat cover and canopy cover are not machine washable.
Dry the washed soft-good in a ventilated place.
Do not expose to the Sun.
To avoid damage to the fabrics wash them gently.
Produced for Kika Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in China.
This product complies with ECE R129; EN 1888-1:2018+А1:2022; EN 1888-2:2018+А1:2022; EN 1466:2023.
ENGLISH

Publicidad

loading