Micropoint qLabs ElectroMeter Plus Manual De Instrucciones página 80

9. Perform a Test ............................................................................. 19
9.1 Entering Test Mode
9.2 Insert a Test Strip
9.3 Entering the Patient ID
9.4 Confirming the Patient ID
9.5 Entering the Strip Code and Lot Number (if enabled)
9.6 After Confirming the Code
9.7 Heating Up
9.8 Getting a Fingerstick Sample
9.9 Performing the Test
9.10 Results and Explanation
9.11 Finishing the Test
10. Reviewing Previous Results ..................................................... 26
10.1 Displaying QC Test Results
10.2 Displaying Patient Test Results
11. Quality Control ........................................................................... 29
11.1 Onboard QC Test
11.2 Liquid QC Test
12. Maintenance .............................................................................. 31
12.1 Care and Cleaning of Your Screen
12.2 Installing/Replacing Batteries
12.3 Servicing
13. Troubleshooting ......................................................................... 32
14. Symbols ...................................................................................... 34
15. Performance Characteristics & Product Specifications ........ 35
15.1 Operation Condition
15.2 Product Specifications
16. Warranty ..................................................................................... 36
17. Contact Address and phone number ...................................... 38
2
EN