Micropoint qLabs ElectroMeter Plus Manual De Instrucciones página 92

8.3 Setting the Date
01/02/12
12:00
DD/MM/YY HH:MM
-
NEXT
OK
01/02/12
12:00
DD/MM/YY HH:MM
-
NEXT
OK
8.4 Setting the Time
The time is in 24-hour format: "HH:MM" (Hour: Minute)
01/02/12
12:00
DD/MM/YY HH:MM
-
NEXT
OK
01/02/12
12:00
DD/MM/YY HH:MM
NEXT
-
OK
8.5 Normal APTT Setting
NORMAL APTT
OFF
NEXT
-
OK
The date format is DD/MM/YY. The first
set of digit (YY) will be highlighted. Use the
functional "+" and "-"buttons to change the
date.
+
Press functional "NEXT" button to go to
the second digit (MM) after a correct date
is selected. Change the month and the day
using the same method.
+
After the day setting, the setting option will
prompt you to the hour setting mode. The
hour will be highlighted on the display. Use
"+" and "-" functional buttons to adjust the
hour. Press "NEXT" functional button when
+
you have the correct hour on the display.
The minute will be highlighted on the display.
Use "+" and "-" buttons to change the
minute. Press "NEXT" to switch between
Date and Time. Press "OK" to save the
+
setting and return to "SETTINGS" screen.
Use "+" and "-" to select whether to
show the RATIO in the test result. If "OFF"
is selected, it does not respond to any
36
operation when pressing "NEXT"; if "ON" is
selected, the meter switches to the value
+
when pressing "NEXT".
14
EN