Micropoint qLabs ElectroMeter Plus Manual De Instrucciones página 99

Do not stare directly at the laser beam.
9.4 Confirming the Patient ID
PATIENT ID
0123456789
OK
9.5 Entering the Strip Code and Lot Number (if enabled)
STRIP CODE
PT/APTT
471213408
LOT: 3052E0503
OK
NOTES:
• If the Lot Number Input function is enabled, you will be asked to
input the strip code and the lot number; otherwise, you just need to
input the strip code.
• The Strip Code contains information of the type of test. After
you entered the Strip Code, the test name will be recognized
automatically and displayed on the screen.
• A different type of test may have different length of code. Make sure
both the length and each digit are exactly the same with those on
the pouch.
9.5.1 Manual Input
STRIP CODE
PT/APTT
471213408
P
ON
LOT: 3052E0503
NEXT
-
OK
STRIP CODE
PT/APTT
471213408
P
ON
LOT: 3052E0503
NEXT
-
OK
If the Patient ID is entered correctly, press
"OK" button to confirm.
Otherwise, press "
Section 9.3 until all numbers are correctly
entered.
If the displayed strip code and lot number
(if enabled) match those on the strip pouch,
press "OK" button to confirm. Otherwise, you
can use "
or use " " to enter the code via barcode
scanner. Press "OK" button to confirm the
code after the strip code is correctly entered.
Use "+" and "-" buttons to change the first
digit highlighted.
+
Press "NEXT" button to accept and advance
to next digit.
To change numbers more quickly, hold down
the functional "+" and "-" buttons.
+
21
" or " " to repeat
" to manually input the strip code
EN