Publicidad
Idiomas disponibles
Idiomas disponibles
en
28
Wear detection on the magnetic foot
Fig. 18
(figure 18).
Moving the machine tool on the set-up sur-
face causes wear to the magnetic foot. This
may result in air gaps between the magnetic
foot and the set-up surface and the magnetic
holding power can be reduced. For check-
ing, the magnetic foot is provided with
indentations. Check for wear each time
before using the machine. If one of these
indentations is no longer fully visible, the
magnetic foot must be replaced. Please refer
to the FEIN customer service agent under
www.fein.com.
4 x
0,1 mm
Publicidad
