Publicidad
Idiomas disponibles
Idiomas disponibles
en
8
Intended use of the power tool:
Magnetic core drill unit for drilling with core
drill bits and solid drill bits on materials with
surfaces suitable for magnets in weather-
protected environments using the applica-
tion tools and accessories recommended by
FEIN.
Operation of the power tool off power generators.
This product is also suitable for use with AC
generators with sufficient power output that
correspond to the Standard ISO 8528,
design type G2. This Standard is particularly
not complied with when the so-called dis-
tortion factor exceeds 10%. When in doubt,
please refer to the generator instruction /
specification guide.
Observe the operating instructions and the
national regulations for the installation and
operation of the AC generator.
Symbols.
Symbol, character
In environments subject to interference, a
reduction of the operating quality is possi-
ble; this can include temporary failure, tem-
porary reduction of the function or the
intended operating behaviour, for the cor-
rection of which intervention by the opera-
tor is required.
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
All other types of use are considered as not
intended for.
Explanation
Make sure to read the enclosed documents such as the
Instruction Manual and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the power plug
out of the socket. Otherwise there will be danger of injury
if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Do not touch the rotating parts of the power tool.
Warning against sharp edges of application tools, such as the
cutting edges of the cutter blades.
Danger of slipping!
Danger of crushes or contusions!
Operating the power tool off
WARNING
power generators whose no-
Publicidad
