Ambu aScope 5 Broncho HD 5.0/2.2 Instrucciones De Uso página 7

2. System description
The aScope 5 Broncho HD must be connected to an Ambu displaying unit. For information about
Ambu displaying units, please refer to the respective displaying units' Instructions for use.
2.1. System parts
Ambu® aScope™ 5 Broncho HD
– Single-use device:
Product name
aScope 5 Broncho HD 5.0/2.2
aScope 5 Broncho HD 5.6/2.8
2.2. Product compatibility
The aScope 5 Broncho HD has been designed to be used in conjunction with:
Displaying units
– Ambu® aBox™ 2
– Ambu® aView™ 2 Advance
Note: Connector port color and geometry on the displaying unit must match the connector color and
geometry on the visualization device.
Endoscopic accessories
– Endotherapy instruments compatible with the working channel ID (such as biopsy forceps,
cytology brushes, endoscopic needles, electrosurgical probes).
– Accessories with standard Luer slip and/or Luer Lock (using the enclosed introducer).
– High frequency electrosurgical equipment fulfilling EN 60601-2-2.
Lubricants and solutions
– Sterile water
– Isotonic saline solution
– Local anesthetic gel and solutions e.g:
• 1 % lidocaine solution
• 2 % lidocaine gel
• Lidocaine 10 % aerosol spray
• Noradrenaline 0.5 mg
• Water based lubricants
Airway management accessories in compliance with EN ISO 5361
– Endotracheal tubes
– Laryngeal masks
– Tracheostomy tubes
– Laryngectomy tubes
– Double-swivel catheter mounts
The aScope 5 Broncho HD has been evaluated to be compatible with the following
endotracheal tubes (ETT) and endotherapy instruments (EI) sizes:
aScope 5 Broncho HD 5.0/2.2
aScope 5 Broncho HD 5.6/2.8
Part numbers:
621001000 aScope 5 Broncho HD 5.0/2.2
622001000 aScope 5 Broncho HD 5.6/2.8
60 cm/23.6"
Outer diameter [mm] "
5.0 mm/0.20"
max 5.7 mm/0.22"
5.6 mm/0.22"
max 6.3 mm/0.25"
Minimum ETT
inner diameter
6.0 mm
7.0 mm
Inner diameter [mm] "
2.2 mm/0.09"
min 2.05 mm/0.08"
2.8 mm/0.11"
min 2.65 mm/0.10"
EI compatible with a
working channel of
2.2 mm
2.8 mm
7