John Bean B 300 Manual Del Operador página 36

36
Operation
5.5.2 Data required for weight application
Normal Offset Distance (rim machine)
Nominal rim diameter
Nominal rim width
Alu 1 Offset Distance (rim machine)
Nominal rim diameter
Nominal rim width
Alu 2 Offset Distance (rim machine)
Nominal rim diameter
Alu 3 Offset Distance (rim machine)
Nominal rim diameter
Alu 4 Offset Distance (rim machine)
Nominal rim diameter
Nominal rim width
Alu 5 Offset Distance (rim machine)
Nominal rim diameter
Nominal rim width
Alu 1P Weight application position on the left
shoulder
Nominal rim width
Note: After the fi rst touch, select the ALU
selection key.
Alu 2P Weight application positions
Alu 3P Weight application positions
*position detected by the arm gauge for weight
application
...