Control Panel When Embroidering - Singer XL-580 Manual De Instrucciones

CONTROL PANEL WHEN
EMBROIDERING
When embroidering, the dials on the control panel are used to
step through the design color by color and within a color block.
and embroidery machine, the display shows number of current
color block and total number of color blocks as illustrated.
block is stitched out, a progress bar on the right side of the
display will show the approximate current position in the color
block.
To step between the transferred color blocks, press the center
indicate which direction you can step between the color
blocks.
Turn the lower dial. The current color block number changes.
block.
To go to a certain part of current color block, press the center
of the upper dial. The horizontal line on the display indicate
the approximate current position in the color block.
Turn the upper dial clockwise to step forward, and counter-
one tenth of the color block.
Example: If a color block contains 150 stitches, each step
corresponds to 15 stitches.
When having reached desired position in the color block,
on page 82 - 83.
102
couture
puntada
color blocks
blocs de couleurs
Paso entre