Threading The Bobbin Thread - Singer XL-580 Manual De Instrucciones

THREADING THE BOBBIN THREAD

1. Raise the needle to its highest position by rotating the hand
2. Remove the bobbin cover plate by pushing the release
allow you to remove the cover.
3. Insert the bobbin making sure the bobbin rotates counter-
clockwise when you pull the thread.
5. With a finger held gently on top of the bobbin, pull the
along the groove on the needle plate until it is snipped with
cutter on the top left.
6. Replace the clear bobbin cover plate onto the needle plate.
14
A
Cutter
Coupe Fil
Cortador
Cannelure
B A