Function Buttons When Embroidering - Singer XL-580 Manual De Instrucciones

FUNCTION BUTTONS WHEN
EMBROIDERING
THREAD CUTTER
Press Thread Cutter to automatically cut the top and bobbin
threads whenever the machine is stopped.
machine will automatically cut the top and bobbin thread every
time the machine stops at the end of a color block.
Use auto thread cut only when changing thread colors.
START/STOP BUTTON
When start/stop button is pushed, machines starts slowly. To
stop the machine, push the button again and the machine will
stop sewing and the needle stops at its highest position.
FORWARD STITCH BUTTON
machine, the embroidery can be advanced one stitch at a
time. Note: The embroidery hoop will move as it is advancing
through the design.
To advance continuously, press and hold this button.
REVERSE STITCH BUTTON
To back up through a design that is already in progress,
reverse one stitch at a time. To reverse continuously, press
LED INDICATOR
Red light indicates machine is operating.
Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect
operation was made.
* C o n t i n u o u s f l a s h i n g i n d i c a t e s t h a t t h e m a c h i n e
malfunctions.
when the embroidery unit is attached.
You may wish to re-adjust thread tension according to the type
of fabric and thread being used.
NOTE: When sewing designs created by the software for
sending the design to the machine. This ensures the best
performance of the machine.
82
Thread Cutter
Cortador de hilo
Forward stitch button
Interruptor de puntadas
hacia adelante
Reverse stitch button
Interruptor de puntadas
hacia atrás
Interrupteur marche/arrêt
Increase tension