Singer XL-580 Manual De Instrucciones página 86

Now you are prompted to select the
the shortcut for the software will be stored.
to continue.
during the installation set-up.
Pressing the button will finally
hard disk.
will indicate the stage at which the installation
will automatically close after finish. Please wait for a short
while until this happens.
If the installation utility identifies
an
some hard disk space before proceeding with the installation.
You can always abort the installation procedure by clicking on
The following steps must be followed for proper start-up
protocol. If these steps are not followed precisely, you will
Boot up your computer, but do not open the embroidery
software. Next attach the embroidery unit to your sewing
computer and sewing machine.
1. Turn on your sewing machine. Make sure the needle has
wheel towards you.
embroidery unit.
80
where
to the given directory on the
100%.
will prompt you to free
open up the embroidery software.
4. You are now ready to select and transmit a design to
your machine.
icon on your desktop to