Straight Stitching - Singer XL-580 Manual De Instrucciones

STRAIGHT STITCHING

B. Tacking stitch mode button
C. Needle up/down position selector button
I. Power/light switch
2. Pull both threads under the presser foot toward the left of
3. Place the fabric under the presser foot and lower the
presser foot lifter.
the needle enters the fabric.
When reaching the edge of the fabric, stop the sewing
machine.
until the needle is in its highest position, then raise the
thread with the thread cutter located on the bottom of the
face cover, as shown.
To keep the seam straight, use one of the numbered guide
lines on the needle plate. The numbers indicate distance from
the needle at its center position.
seams.
36
00
1
A
B
C
D
E
F
G
2
5
6
H
I
4
3
mm
mm
mm
mm
mm