Publicidad
Idiomas disponibles
Idiomas disponibles
Safety information
Read the safety precautions in this manual before installing,
The following symbols are used to identify important safety information on the product and in this manual:
Warning!
Safety hazard.
Risk of severe
voltage. Risk
injury or death.
severe electric
Warning! Risk Group 3 product according to EN 62471 and Risk Group 2 product according
to IEC/TR 62778 (see "Protection from eye injury" on page 9 for full details). Possibly
hazardous radiation emitted from this product. May be harmful to the eyes. Do not stare
directly into the light output from the product. Position the product so that prolonged staring
into the product at a distance closer than 56 m (184 ft.) is not expected. Do not view the light
output with optical instruments or any device that may concentrate the beam.
The MAC Viper XIP lighting fixture presents risks of severe injury or death due to fire and
burn hazards, electric shock and falls if the safety precautions in this manual are not
followed.
You may carry out external cleaning and service as described in the fixture's user
documentation, following the warnings and instructions provided, but any service operation
not described in this Safety and Installation manual or in the fixture's User Manual must be
referred to an authorized Martin service technician.
The MAC Viper XIP is for professional use as a stage light only. It is not for household or
general lighting applications. Respect all locally applicable laws, codes and regulations
when installing, powering, operating or servicing the fixture.
Ensure that the installation complies with the provisions of ANSI/ESTA E1.58-2017. This
standard gives important information on the temporary use of stage and studio lighting
equipment outdoors that is supervised by qualified personnel while energized and
inaccessible to the general public in the USA as referred to by NFPA 70 article 520.10.
Touring shows in Canada must obtain a permit from the relevant authority before the first
performance. Respect national and local regulations at all times.
The light source contained in this fixture must be replaced by Martin
authorized Martin Service partner only.
Install, operate and service Martin products only as directed in their user documentation, or
you may create a safety hazard or cause damage that is not covered by product warranties.
Read this manual before installing, powering, operating or servicing the fixture. Follow the
safety precautions and observe all warnings in this Safety and Installation Manual, in the
fixture's User Manual, and printed on the fixture.
powering, operating or servicing this product.
Warning!
Warning!
Hazardous
Fire hazard.
of lethal or
shock.
®
Martin
MAC Viper Safety and Installation Manual Rev. B
WARNING!
Warning!
Warning!
Burn hazard.
Intense light
Hot surface.
emission.
Do not touch.
Warning!
See user
documentation.
®
Service or an
5
Publicidad
