Beurer ANTELOPE Corefit I Instrucciones De Uso página 20

11. DISPOSAL
For environmental reasons, do not dispose of
the device in household waste at the
end of its service life. Dispose of the de-
vice at a suitable local collection or recy-
cling point in your country. Observe the
local regulations for material disposal.
Dispose of the device in accordance with EC Di-
rective Waste Electrical and Electronic Equip-
ment (WEEE). If you have any questions, please
contact the local authorities responsible for
waste disposal.
The empty, completely flat batteries must be
disposed of at specially designated collection
boxes, recycling points, or electronics retailers.
You are legally required to dispose of the bat-
teries.
The codes below are printed on batteries contain-
ing harmful substances:
Pb = battery contains lead
Cd = battery contains cadmium
Hg = battery contains mercury
12. TECHNICAL
SPECIFICATIONS
Type Antelope Corefit I
Output Symmetrical, two-phase rectan-
waveform gular form
Output Max. 70 V pp ±10% (500 ohm)
voltage
Output Max. 140 mA pp ±10%
current (500 ohm)
Pulse 5-85 Hz ±10%
frequency
Pulse length 250-400 μs ±10%
Voltage 3 x 1.5 V AAA (type LR 03)
supply
Application 20 – 30 minutes
time
Intensity Adjustable from 0 to 40
Electrode size Approx. 11.5 x 6.5 cm / 10 x
9 cm
Weight ~ 330 g (without batteries or
without extension)
batteries
Belt size Approx. 70 to approx. 140 cm
for a waist
circumference
of:
Operating 10°C to +40°C,
conditions 20-65% relative humidity
Storage 0°C to +55°C,
conditions 10-90% relative humidity
If the device is not used according to the
specifications, it may not work correctly!
We reserve the right to make technical
changes to improve and develop the prod-
uct.
13. GUARANTEE
More information on the guarantee and guar-
antee conditions can be found in the guarantee
leaflet supplied.
20