Stihl FS 75 Manual De Instrucciones página 17

English / USA
2
2
1
Blocking the Drive Shaft
:
Insert the stop pin (1) in the bores
(2) in the defelector and thrust plate.
Turn thrust plate to and fro until the
stop pin slips into position and
blocks the shaft.
16
2
1
Mounting the Mowing Head
Keep instruction sheet for cutting
head in a safe place.
Assembling STIHL AutoCut 11-2
: Fit spring (1) in the spool
housing (2).
: Wind the nylon lines onto the spool:
see "Replacing Nylon Line"
:
Assemble the mowing head: see
"Replacing Nylon Line"
6
2
4
3
5
: Slip the mowing head (2) over the
shaft (3) and engage hexagon
recess (4) on external hexagon (5).
:
Fit the cap (6) on the mowing head
and screw it clockwise onto shaft as
far as stop. Tighten it down firmly.
FS 75