Adjusting Nylon Line - Stihl FS 75 Manual De Instrucciones

7
3
STIHL PolyCut 10-3
:
Screw the mowing head (7)
clockwise onto the shaft (3) as far
as stop.
:
Use stop pin to block the shaft.
: Tighten down the mowing head
firmly.
Remove the stop pin.
FS 75
8
7
3
STIHL PolyCut 5-3
:
Place the nut (8) in the mowing
head.
:
Screw the mowing head (7)
clockwise onto the shaft (3) as far
as stop.
: Use stop pin to block the shaft.
: Tighten down the mowing head
firmly.
Remove the stop pin.
English / USA
2

Adjusting Nylon Line

STIHL AutoCut 11-2
:
Hold the rotating mowing head
horizontal to the ground – tap it on
the ground – about 3 cm (1 1/4")
fresh line is advanced.
: The blade (1) on the deflector (2)
trims surplus line to the correct
length. Avoid tapping the head more
than once.
1
17