Care, Maintenance; Care & Maintenance; Care; Maintenance (Fuse Replacement) - DJO Global ARTROMOT-K1 Modo De Empleo

6. Care, Maintenance

6.1 Care

Warning!
m
Shock hazard –
Unplug the device from the power line
before cleaning.
Shock hazard, equipment damage –
Liquids must not enter the device or the
programming unit.
− ARTROMOT®-K1 can be disinfected
by wiping down with a disinfect-
ant. Thus, it complies with the special
hygiene standards for medical technical
equipment.
− The enclosure and removable leg sup-
port assemblies can be cleaned with
commonly used disinfectants and mild
household detergents.
− Use only a damp cloth to wipe the car-
riage down.
WARNING!
m
Patient hazard –
patient contamination
− Before using the device on another
patient, be sure to clean and disinfect
it according to the instructions given
here.
ORMBS-12006_Artromot_K1_Comfort_2012_rz.indb 60
Caution!
m
Equipment damage –
− The plastic material used is not
resistant to mineral acids, formic acid,
phenols, cresols, oxidizing agents and
strong organic or inorganic acids with
a pH value below 4.
− Use only clear disinfectants to pre-
vent discoloration of the device.
− Do not expose the CPM device to
strong ultraviolet radiation (sunlight)
and fire.
6.2 Maintenance
(fuse replacement)
Check before each use
Visually inspect the device for signs of
mechanical damage before each use.
If you detect damage or malfunctions that
may impair the safety of the patient or
of the operator, have the device repaired
before using it.
Technical Inspections
For safety, the devices require regular
maintenance. To maintain the functional
and operational safety, check all compo-
nents for damage and loose connections at
least once a year.
60
18.05.12 17:27