Scope Of Delivery - Abicor Binzel iROB P400 Instructivo De Servicio

iROB

4 Scope of delivery

• iROB robot welding power source
• Power cable (open) robot welding power source iROB - mains supply
Tab. 6 Scope of delivery
• Cooling unit iCOOL
(for liquid-cooled version only)
• Mounting platform
Tab. 7 Options
For an operational robot welding system, the following components are required:
• Analog robot interface RI1000, digital robot interface RI2000 or bus interface RI3000 with a BUS module
• Connecting cable: Robot interface
(Power source) - Robot control
• Shielding gas welding torch including cable
assembly and torch mount
• iFEED wire feeder
Tab. 8 Robot welding system
Order the equipment parts and wear parts separately. Order data and ID numbers for the equipment parts
and wear parts can be found in the current ABICOR BINZEL spare parts and wear parts lists.
The contact for consulting and ordering can be found in the Internet at www.binzel-abicor.com.
4.1 Transport
The scope of delivery is carefully checked and packaged, however damage may occur during shipping.
Checking procedure Make sure that the shipment is complete by referring to the delivery note!
on receipt of goods
Check the delivery for damage (visual inspection)!
In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately! Keep the
packaging for possible checks by the carrier.
Packaging for return Use the original packaging and the original packaging material. If you have questions concerning the
shipment
packaging and safety during shipment, please consult your supplier, carrier or transporter.
Tab. 9 Transport
4.2 Storage
For ambient conditions for storage in a closed environment, see:
 Tab. 3 Ambient conditions for transport and storage on page EN-8
• Operating instructions
• Remote control iCONTROL
• Plug for power cable (open) robot welding power source iROB - mains
supply
• Intermediate cable assembly
• Remote control iCONTROL
4 Scope of delivery
EN - 11