Control Panel Display Information; Information Area - Stihl RMI 422 P Manual De Instrucciones

13 Control Panel Display Information

WARNING
To reduce the risk of electric shock, charge the robotic
mower only in the docking station. Do no remove the battery
or attempt to charge it using an external power supply.
Automatic charging
The robotic mower will begin charging automatically when it
docks in the docking station at the end of the mowing
operation and its energy level is below a certain value.
Starting charging manually
To start charging:
► Dock the robotic mower.
► If necessary, end standby mode of the robotic mower by
pressing any button.
Charging will start automatically.
During charging, the display will show the message
"Charging battery" in the status screen.
In all the other menus, the display will show a plug
symbol to indicate that the robotic mower is charging.
Charging time depends on a number of factors, including
battery condition and the ambient temperature. Exposure to
direct sunlight can lead to increased temperatures inside the
machine and battery compartment, which can increase
battery charging times.
Charge status
The current state of charge is indicated in the status
screen.
In all the other menus, the display will show a battery
symbol to indicate the robotic mower's charge status.
0478-131-3045-A
If you end standby mode of the robotic mower by pressing
any button, but the state of charge is too low for the robotic
mower to return to the docking station, this symbol is display
over the entire screen. After a few seconds, the display will
turn off and the robotic mower will return to standby mode.
13 Control Panel Display Information

13.1 Information Area

The following information is shown in the top right corner of
the display:
1. Time
The current time is indicated in 24 hour format.
English
43