Mowing Duration; Opening And Closing The Flap; Adjusting The Cutting Height - Stihl RMI 422 P Manual De Instrucciones

16 During Operation
When automatic mowing is switched on, the robotic mower
independently leaves the docking station and mows the lawn
during the active times set by the operator, @ 14.6. The
number and duration of the mowing and charging operations
within the active times are determined automatically.
The mowing plan is determined based on the size of the
mowing area calculated during installation or during the
creation of a new mowing plan.
When you switch on automatic mowing, the display
shows the automatic mowing symbol next to the
battery symbol.
► Define starting points in linked areas to have the robotic
mower automatically mow linked areas.
► To end an active mowing operation manually, press the
STOP button on the robotic mower or press the ON/OFF/
Home button on the docking station twice at any time.
When the battery is discharged, the robotic mower
automatically returns to the docking station.

16.2 Mowing Duration

The mowing duration specifies how many hours per week
the robotic mower will mow the lawn. Charging time is not
included in the mowing duration.
During initial installation, the robotic mower automatically
calculates the mowing duration appropriate for your lawn
based on the specified size of the mowing area. The
calculation is based on a normal lawn under dry conditions.
To complete a mowing area of approximately 1076 sq. ft.
(100 m²), the robotic mower will need approximately 100
minutes on average.
► If necessary, extend or reduce the active times and
mowing duration, @ 14.6 and @ 14.7.

16.3 Opening and Closing the Flap

The robotic mower is equipped with a flap which protects the
display from the weather and from inadvertent operation. If
the flap is opened during use of the robotic mower, operation
is stopped and the mowing blade and robotic mower come
to a standstill.
0478-131-3045-A
To open the flap:
► Press the STOP button during running operation.
► Grasp the flap (1) at the lifting point (2) and release it
upwards by pulling lightly.
► Open the flap as far as the stop.
To close the flap:
► Carefully fold the flap downwards and allow it to engage.
NOTICE
The opened flap can be removed upwards from the
machine. This ensures that the unit cannot be lifted and
carried by the flap.

16.4 Adjusting the Cutting Height

WARNING
To reduce the risk of serious personal injury or death,
always press the STOP button before opening the flap and
adjusting the cutting height of the mowing blade.
English
1
2
57