Mowing Plan - Stihl RMI 422 P Manual De Instrucciones

Ocultar thumbs Ver también para RMI 422 P:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

14 Menu Functions
Robotic mower status
This submenu contains information on the robotic
mower's status:
– Charging status: Battery charging status in percent
– Rem. time: The remaining mowing duration during
the current week in hours and minutes
– Time and date
– Start time: Start of the next planned mowing
operation
– Total number of completed mowing operations
– Mowing hours: Duration of all completed mowing
operations in hours
– Distance: Total distance covered in meters
– Ser.-No.: Serial number of the robotic mower. This
is also to be found on the identification plate in the
compartment beneath the control panel.
– Battery: Serial number of the battery
– Software: Installed machine software
Lawn information
This submenu contains information on the lawn:
– Mowing area in square meters: This measurement
is taken during installation
– Round time: Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4: Distance of the relevant
starting point from the docking station in meters,
measured in a clockwise direction
– Circumference: Circumference of the mowing area
in meters
– Edge mowing: Frequency of edge mowing per
week
0478-131-3045-A

14.5 Mowing Plan

Mowing Plan Theory of Operation
Before changing your mowing plan, read the following
section carefully. There are two components to the mowing
plan: mowing duration and active times. The STIHL iMow
mowing plan is designed to be flexible. For best results, the
ratio between mowing duration and active time that is
developed during the initial setup of your iMow should be
maintained.
During the initial setup, the iMow will automatically calculate
an appropriate automatic mowing plan. That plan consists of
active times and a weekly mowing duration. Active times are
those windows of time in which the iMow is programmed to
mow automatically. The iMow will only mow in automatic
mode during the active times. The mowing duration is the
total number of hours the iMow will mow per week.
Satisfactory cutting results depend on the iMow having
sufficient mowing duration and sufficient active times to
complete the mowing operation for the entire lawn.
Automatic mowing will cease once the iMow has reached its
total allotted mowing duration for the week, even if there are
remaining active times scheduled.
The active times and mowing duration must be set properly
to ensure that a sufficient number of mowing hours are set
each week (mowing duration) and that the iMow has
sufficient windows of time (active times) to complete the
mowing. If you increase the mowing duration, be sure
expand the active times as well to accommodate the
increased number of mowing hours. The total weekly active
time must be higher than the total weekly mowing duration
in order to account for charging time and to provide a buffer
in case active times are missed due to rainfall.
The status screen displays the remaining mowing duration
for the week and the next scheduled active time.
English
49

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido