Setting Mts/Sap Mode - Pioneer PDP-6072HD Manual De Instrucciones

Basic Operations

Setting MTS/SAP mode

When watching conventional TV programs, you may enjoy
stereo sound and/or Secondary Audio Programs (SAP), using
the Multi-channel Television Sound (MTS) function.
• Stereo broadcasts
You can enjoy, for example, sports, shows, and concerts in
dynamic stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
NOTE
• Conventional TV channels in this manual designate TV
channels that are received through the conventional VHF/
UHF frequencies or conventional cable TV channels.
• When stereo sound is difficult to hear, you may manually
switch to the MONO mode to obtain clearer sound.
• Once the MONO mode is selected, the Plasma Display
System sound remains mono even if the system receives a
stereo broadcast. You must reselect the STEREO mode if you
want to hear stereo sound again.
• Selecting MTS while the input source is INPUT 1 to 6 or PC
does not change the type of sound. In this case, sound is
determined by the video source.
Each time you press MTS, MTS toggles as shown below.
STEREO mode SAP mode
STEREO
NOTE
• The MTS button is disabled while the TV Guide On Screen™
system is displayed.
• In each of the MTS/SAP modes selected, the display
changes depend on broadcast signals being received.
MONO mode
SAP MONO
When receiving STEREO sound signals
A 125
STEREO In STEREO mode
A 125
STEREO In SAP mode
A 125
MONO
In MONO mode
When receiving MONO + SAP sound signals
A 125
MONO (SAP) In STEREO mode
A 125
SAP (MAIN) In SAP mode
A 125
MONO (SAP) In MONO mode
When receiving STEREO + SAP sound signals
A 125
In STEREO mode
STEREO (SAP)
A 125
SAP (STEREO) In SAP mode
A 125
MONO (SAP) In MONO mode
When receiving MONO sound signals
A 125
MONO
In STEREO mode
A 125
MAIN
In SAP mode
A 125
MONO
In MONO mode
06
35
En