Querying The Prosthesis Status; Query Status Through Cockpit App; Status Display In The Cockpit App; Status Information On The Display Of The Remote Control (Optional Accessory) - Ottobock C-Leg 3C98-3 Instrucciones De Uso

→ If Bluetooth is switched on, the

8.5 Querying the prosthesis status

8.5.1 Query status through cockpit app

1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "Status".

8.5.2 Status display in the cockpit app

Menu option
Trip: 1747
Step: 1747
Batt.: 68

8.5.3 Status information on the display of the remote control (optional accessory)

Menu option
Trip:1747
Step:1747
Batt.:68
Bluetooth: On

9 Additional operating states (modes)

9.1 Empty battery mode

Beeps and vibration signals are emitted if the available battery charge level is 0% (see Page 66).
During this time, damping settings are set to their safety mode values. The prosthesis is then
switched off. You can switch back to basic mode (mode 1) from empty battery mode by charging
the product.

9.2 Mode for charging the prosthesis

The product is non-functional during charging.
The product is set to safety mode damping. This may be low or high depending on the setting in
the adjustment software.

9.3 Safety mode

The product automatically switches to safety mode if a critical system fault occurs (e.g. failure of a
sensor signal). Safety mode remains in effect until the error has been rectified.
Default damping values are activated in safety mode. This makes limited walking possible for the
user even though the system is not active.
The switch to safety mode is indicated by beeps and vibration signals immediately prior to switch­
ing (see Page 66).
symbol appears on the screen.
Description
Daily step counter
Total step counter
Current prosthesis charge
level, as a percentage
Description
Daily step counter
Total step counter
Current prosthesis charge
level, as a percentage
Switch Bluetooth function of
the prosthesis on or off
Possible actions
Reset the counter by tapping
the "Reset" button.
For informational purposes
only
For informational purposes
only
Possible actions
Reset the counter by using the
key to confirm the menu
option
For informational purposes
only
For informational purposes
only
The Bluetooth function of the
prosthesis can be turned on or
off (see Page 60) by confirm­
ing the menu item with the
key.
Ottobock | 61