Babyauto Savile V8A Manual De Uso página 23

2. SEAT PARTS AND FITTINGS
A. Headrest.
B. Group 1 vertical belt hook. (Instalation without IsoFix)
C. Group 2 & 3 vertical belt hook
D. Lateral.
E. Harness pads.
F. Harness straps.
G. Lateral adjustment button.
H. Locking buckle.
I. Buckle release-button.
J. Buckle pad.
K. Harness adjustment button.
L. Group 1 abdominal belt hook. (Instalation without IsoFix)
M. Child seat gradient adjuster.
N. Harness adjuster strap.
O. Red locking clip.
P. Group 2 & 3 abdominal belt hook.
Q. Headrest height adjustment.
R. Top Tether guides for ISOFIX based installation.
S. Top Tether fixing points.
T. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 0+.
WARNING
Do not use the child seat on a passenger seat fitted with an active
airbag.
1. Pull the base safety clamp downwards (3.1), align the base with
the metal bar and hooks on the base of the seat (3.2 and 3.3).
2. Slide the base until it is in the position sought, and then release the
base safety clamp when it has reached the correct position and
you hear a "click" (3.4).
3. Move the rear of the base forward and backward. Make sure that
the 4 hooks are secured to the base and metal anchors.
4. Place the child seat in its most reclined position using the red
recliner handle
Group 0+/1/2/3
M (3.5).
Only suitable for Group 0+, approx.
0 to 15 months (0-13 Kg.)
www.babyauto.com
EN
23