Babyauto Savile V8A Manual De Uso página 26

5. INSTALLING CHILD SEAT. GROUP 2 & 3.
WARNING
1. Unfast the harness pressing the red button (5.1).
2. Remove padded covers for Group 0+ and 1 (5.2).
3. Raise the backrest cover and hide the harnesses behind it (5.3).
4. Lift and remove the base cover (5.4).
5. Pass the buckle of the harness system through the slot in the base
(5.5).
6. Turn the harness adjuster button towards the front of the seat
base; you must store the buckle in the hole in the base specially
designed for this purpose (5.6)
7. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (5.7)
8. Place the child in the child car safety seat(5.8).
9. Pass the vehicle seat belt through the
guides; ensure that the belt is not twisted (5.9).
10.Insert the vehicle safety belt in the vehicle anchor point. You will
hear a "click" when properly installed (5.10).
11.Make sure the vehicle's safety belt is not twisted, also check that
the seat cover does not impede the movement of the vehicle's
safety belt or prevent the installation of the seat in any way. To
release your child unbuckle the vehicle safety belt as described in
the instructions.
IMPORTANT
Ensure that the belt has no slack.
26 Child restraint system
Only suitable for Group 2 & 3, approx.
4-12 years(15-36 Kg.)
C red guides and P waist
SAVILE V8A