Hofmann geodyna 7850p Manual De Operador página 62

Ocultar thumbs Ver también para geodyna 7850p:
Tabla de contenido

Publicidad

62
5-16
5-17
Operation
5.7.1
Advanced Spoke Detection
This mode, to be enabled in case of need and only in
F
"BALANCING" (
5.9) and "BALANCE WITH RUN
F
OUT" modes (
5.8), allows exact identifi cation of rim
spokes position and size.
It allows a more precise placement of weights behind
the spokes. If the laser scanners cannot recognise the
spokes or the operator decides he/she is dealing with
a rim with a particularly complex shape, enable the
Advanced Spoke Detection function which recognises
any type of spokes, even those with unusual shapes,
for example: paired, oblique, with holes or of different
sizes to one another (Fig. 5-16).
Before performing the measuring run:
From the SETTINGS screen select "Spoke Detection"
then "ADVANCED".
Perform the normal procedures for the run.
Note: This function increases the time for the total
measuring cycle by 5 seconds.
If the Spokes Count function is active, the screen
shown in the fi gure is displayed during the measuring
run (Fig. 5-17)

Publicidad

Tabla de contenido
loading

Tabla de contenido