Hofmann geodyna 7850p Manual De Operador página 64

64
3
2
1
5-18
5-19
5-20
Operation
5.8 Print Report
After enabling the printing function of the screen page
in the settings page, the print key is available (1).
By pressing key (1) all the three available options will
be shown:
2 - Single report prints
3 - Current screen prints
The report can be printed (Fig. 5-18) (with optional
printer or USB fl ash drive) to summarise technical
information only for "BALANCING" and "BALANCE
NO SPOKES" modes.
All the information saved during the diagnosis of rim,
or of rim with mounted tyre, can be printed (Fig. 5-19).
5.8.1 Print on USB fl ash drive
As well as producing a printout, a PDF fi le can be
produced and saved.
Proceed as follows:
•
Insert a USB fl ash drive in one of the machine's
F
USB ports ( 4.0).
•
Enable the three functions indicated on the
SETTING page simultaneously (Fig. 5-20).
•
All prints will be saved on a USB fl ash drive in PDF
format.