Tabla de contenido
Publicidad
EN
M
§5.2 - Position of the mounting brackets on the alumin-
ium sliding tubes for DH-SM(R) 1500-2000 kg
Refer to the FITTING DRAWING for confirma-
tion of the correct position of the mounting
brackets of the sliding tubes.
If not available (e.g. fitting of stock HTL), refer to the
TECHNICAL SUMMARY, to determine the positions of the
mounting brackets:
1. The position of the rear mounting brackets evolves
from the work position of the HTL [1 on Fig. 5.11].
2. The position of the front mounting brackets [2 on Fig.
5.11] evolves from the overhang dimension M [3 on
Fig. 5.11]. When the platform is not mounted flush with
the rear end of the vehicle, correct the overhang di-
mension M accordingly.
3. Follow the instructions for the 3rd / middle mounting
bracket [4 on Fig 5.11].
It is important to position the mounting brackets
of the sliding tubes with due diligence. Wrong
positioning can lead to overload situations, and
premature failure of the HTL [See fig. 5.12].
5.12.a
Mounting bracket too much to the rear
5.12.b
Mounting bracket too much to the front
DHOLLANDIA
5.11
DH-SM(R) 1500-2000 kg
2
5.12
5.12.a
39
3
4
1
5.12.b
+
MIN.
MÁX.
D1
200
350
D2
0
100
#3 / lados
Publicidad
Tabla de contenido
